Businesses in Wheaton have different electrical needs than homeowners do, and the work reflects it. A retail space or office that cannot close for a day needs repairs scheduled around operating hours. A landlord managing a multi-unit building needs code violations corrected before a lease is signed. Whether the call comes from a property manager, a business owner, or a homeowner dealing with a dead circuit, we handle the full range of commercial and residential electrical work throughout Wheaton and the surrounding Montgomery County area.
We take calls every day from 7:30 AM to 8:00 PM. You get a price on the phone before anything is booked, and the scope is worked out on the same call. No-pressure estimates, priced up front, mean you decide what happens next with a clear number in hand.
On a kitchen remodel, a basement finish, or a commercial build-out, the electrician has to be in the walls before the drywall goes up. That sounds obvious, but it gets skipped more often than it should. When the order is not planned, the drywall crew finishes, and the electrician is left cutting into new walls to run wire that should have gone in a week earlier. The remediation costs more and takes longer than the original rough-in would have.
We coordinate with the general contractor or the homeowner directly to confirm when the framing is ready and what the rough-in covers. That conversation happens before anyone is on site, not after the first inspection reveals a missed circuit.
The second visit, after drywall and paint, covers device installation, fixture mounting, and the final panel connections. This is where the circuits get tested under load and any code items from the rough-in inspection get addressed. A job that was planned from the start runs through this stage without surprises. One that was not tends to surface them here.
A call that cannot wait gets treated that way. Sparking outlets, a panel that will not reset, or a circuit that has gone out in a space that has to stay operational are not situations where we ask someone to wait until next week. When you call and describe what is happening, we work out what the schedule can accommodate and tell you on the same call.
For tenants and businesses that need to stay open, we confirm the access plan and the timing before the visit is booked. If a repair needs to happen in a kitchen that serves customers or a server room that cannot go down, that is part of the scope conversation. We work out what the job requires and what the property requires, and we plan around both.
Appointments are confirmed before the visit. You get a clear picture of what is being done, what it costs, and when to expect someone before anything is put on the calendar.
A lot of the wiring in older Wheaton homes runs through attics and crawl spaces, and that changes how a job is planned. Pulling a new circuit through a finished wall often means going up or down rather than across. Knob-and-tube wiring, when it is present, tends to run through exactly these spaces, and inspecting or replacing it means working in areas that are not designed for easy access.
We factor access conditions into the scope before the visit. If the attic has limited clearance or the crawl space requires a specific approach, that gets worked out on the call so the job is not half-finished because the access was not accounted for.
A ceiling fan or a chandelier at fifteen feet is a different job from one at eight. High ceilings in older homes and commercial spaces require planning the access before the fixture goes up. The wiring path, the box rating, and the mounting method all depend on what is above the ceiling and how the circuit is run. We scope those details before the appointment so the visit covers what it needs to cover.
The honest answer is that the price depends on what the job actually involves once we get into it. A breaker that keeps tripping might point to an overloaded circuit, a failing breaker, or a wiring fault behind the wall. Each one resolves differently, and the cost reflects what the resolution requires.
Three things move a quote most often. The first is what the fault turns out to be once it is traced. The second is what has to be opened up to reach it, which in an older home with finished walls can add work that was not visible from the outside. The third is whether the existing panel can carry the change, because a circuit upgrade that requires a panel upgrade first is a larger job than one that does not.
When you call, we go through the scope and give you a number before anything is scheduled. That number covers what we have discussed. If the job opens up something unexpected, we stop and explain what we found before any additional work proceeds. Ask what the price covers and you get a straight answer.
When the work is finished, we test every circuit and device that was part of the job. Outlets are checked for correct polarity and grounding. GFCI and AFCI devices are tested to confirm they trip and reset correctly. Breakers are confirmed to be sized for the circuits they protect.
Panel labeling is part of this stage. A panel where every breaker is correctly identified is useful when the next repair happens, and it is something a home inspector or a buyer's electrician will look at. Electrical work done to the standard the next inspection expects means the documentation holds up when the property changes hands or a tenant moves in. We leave the panel labeled, the work written down, and the circuits tested before we consider the job closed.
Older homes in and around Wheaton carry wiring that reflects when they were built, and the work that comes out of that is specific. Flickering lights and warm outlets are warning signs, not quirks. The following are the jobs that come up most often, and what each one actually involves.
A Level 2 home charger runs on a dedicated 240-volt circuit, typically sized at 50 amps. Before any wire is pulled, we check whether the existing panel has the capacity to carry the added load. If it does not, a panel upgrade is part of the scope. The circuit is sized to the charger, and the installation is confirmed to code before the charger goes live.
GFCI protection is required near water: kitchens, bathrooms, garages, and outdoor outlets. AFCI protection applies to bedroom circuits and, under current code, to most living-area circuits in renovations and new construction. Older homes in this area often have neither, and bringing them up to current standards is straightforward work that makes a real difference in how a home performs under inspection.
Aluminum branch wiring was installed in many homes built during the 1960s and 1970s. It expands and contracts at connection points in a way that copper does not, and loose connections are the result over time. Remediation can mean replacing the branch circuits, adding approved connectors at every device, or a combination of both depending on what the inspection finds.
A 100-amp service was adequate for a household of a few decades ago. It is not adequate for a home running an EV charger, central air, a washer and dryer, and a modern kitchen. A load calculation tells us what the existing service can carry and what an upgrade to 200-amp service would allow. We handle the panel replacement, the service-entrance work, and the meter-base connection.
A panel where the breakers are not labeled, or where the labels no longer match the circuits, is a problem that surfaces at the worst times. We trace and label every circuit as part of panel work, and we can do it as a standalone job for a property where the documentation has never been done or has been lost.
Battery-operated alarms are better than nothing. Hardwired alarms with battery backup are more reliable, and in many jurisdictions they are required in rental properties and in homes where other electrical work has been permitted. We install interconnected hardwired alarms so that when one sounds, they all sound.
We cover Wheaton and the surrounding communities in Montgomery County. North Kensington, Glenmont, Kensington, Kemp Mill, and Garrett Park are all within our service area, and calls from those communities are handled the same way. If you are in the county and want to confirm we cover your address, the fastest way is to call. Residential wiring. Commercial wiring. One number for both. What a job like this usually involves is described on the services page.
Yes. If a resident depends on powered medical equipment, we plan the shutdown window around that dependency. The goal is to keep the circuits feeding that equipment live while other work is done, or to schedule any required shutdown during a period when the equipment can be safely disconnected. Let us know on the call so we can plan accordingly.
Low-voltage landscape lighting runs from a transformer that plugs into a standard outdoor outlet, so the electrical work is usually limited to installing a weatherproof outlet in the right location. Line-voltage outdoor lighting, including driveway fixtures and security lights, requires a dedicated circuit or a connection to an existing outdoor circuit with enough capacity. We assess which approach fits the installation and scope it on the call.
Older homes in this area frequently have knob-and-tube or aluminum branch wiring, undersized panels, and outlets without GFCI or AFCI protection. These are not always obvious until a repair surfaces them or an inspection flags them. When you call and describe what you are seeing, we can usually tell you on the phone whether it points to one of these underlying conditions or something more straightforward.
Yes. When you call, we work out the access plan and the timing before anything is booked. If the repair needs to happen in a space that cannot go dark, that is part of the scope conversation. We confirm what the job requires and what the property requires, and we plan the visit around both.
We need access to the panel to do the work, so access arrangements are sorted out when the visit is booked. If the panel is in a shared space or behind a locked door, let us know on the call and we will confirm the plan before anyone is dispatched. A visit that cannot reach the panel cannot be completed.
We count the available breaker slots and check whether any double-pole breakers are occupying space that could be used differently. Beyond slot count, we also look at the total load on the service to confirm the panel can carry any new circuits being added. A panel that looks full sometimes has options, and one that looks empty can still be at its load limit.
Yes. The work completed at the property is documented, and we can provide that record to the property owner or manager. Landlords and property managers often need documentation for their records or for a future inspection, and we factor that into how the job is closed out.
We plan the work around the store's operating hours and identify which circuits can be taken down without affecting the trading floor. Work that requires a full shutdown is scheduled outside business hours, within our 7:30 AM to 8:00 PM availability window. We confirm the schedule with the property manager or owner before the visit so the disruption is planned rather than a surprise.
We handle electrical work in multi-unit residential buildings, including outlet replacements, panel work, GFCI and AFCI upgrades, and code violation repairs. Landlords and property managers call us ahead of tenant turnovers and inspections, and we work out the scheduling to fit the property's occupancy.
Call (227) 294-9289 and describe the building and the scope, and we will work through the details on the same call.
A single outlet that stopped working, a light that flickers only sometimes, a breaker that trips once and then holds. These feel like small things, and sometimes they are. But a loose connection behind an outlet and a failing breaker both start small. We are available every day from 7:30 AM to 8:00 PM, and a call to describe what you are seeing costs nothing.
Call (227) 294-9289 to get a quote and get it on the schedule.
We handle the small jobs and the large ones, and the call is the same either way.
Browse our service area list. Electrical work in the surrounding towns: Aspen Hill, White Oak, Fairland.
Below is a plain-language breakdown of the electrical work we handle for homes and businesses in Wheaton and across Montgomery County. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. Scroll through, find what matches your situation, and call us for a quote on the specifics.
| Electrical Service | What the Job Involves | When You Need It | Good to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrades, Load calculations, Subpanel installation, Panel replacement | Older homes adding appliances, EV chargers, or finishing a basement or addition | Panel and wiring work is finished to code. A load calculation is part of every upgrade quote so you know whether the existing service can carry what you are adding. |
| Wiring & Circuit Installation | New construction rough-in, Remodel and addition wiring, Whole-home rewiring, Garage and outbuilding circuits | Remodels, additions, and any project that requires new circuits or updated wiring throughout the home | Electrical work done to the standard the next inspection expects is how we approach every wiring job, from a single new circuit to a full rewire. |
| Basement & Sump-Pump Circuits | Dedicated sump-pump circuit installation, Basement finishing wiring, Utility and laundry circuits, GFCI protection in wet areas | Homeowners finishing a basement or adding a sump pump where a dedicated circuit is needed | A sump pump on a shared circuit can lose power at the wrong moment. A dedicated circuit keeps it isolated from other loads in the home. |
Call (227) 294-9289 and we will walk through your situation, give you a straight price, and get it on the schedule.
(227) 294-9289